Notes on sourcing 5-axis machining in Vietnam.https://5axisvn.com/https://5axisvn.com/blog/5-axis-inconel-machining-vietnam/https://5axisvn.com/blog/5-axis-inconel-machining-vietnam/Few Vietnam shops can cut Inconel 718 or 625 on 5-axis machines with stable tool life. What separates them, what to ask for and when to keep the part elsewhere.Sat, 24 Oct 2026 00:00:00 GMThttps://5axisvn.com/blog/5-axis-impeller-machining-vietnam/https://5axisvn.com/blog/5-axis-impeller-machining-vietnam/Open and closed impellers, volutes and pump parts on 5-axis machines in Vietnam: when simultaneous work is needed, materials, balancing and what to specify.Wed, 21 Oct 2026 00:00:00 GMThttps://5axisvn.com/blog/5-axis-first-article-inspection-vietnam/https://5axisvn.com/blog/5-axis-first-article-inspection-vietnam/How to ask for first article inspection on 5-axis parts made in Vietnam: ballooned drawing, CMM report, material certificate and what to approve before the full run.Sat, 17 Oct 2026 00:00:00 GMThttps://5axisvn.com/blog/5-axis-copper-machining-vietnam/https://5axisvn.com/blog/5-axis-copper-machining-vietnam/Copper and brass cut differently from steel. What to specify for 5-axis electrodes, busbar blocks and brass fittings from Vietnam: alloy, burrs, plating, packing.Wed, 14 Oct 2026 00:00:00 GMThttps://5axisvn.com/blog/5-axis-cam-programming-vietnam/https://5axisvn.com/blog/5-axis-cam-programming-vietnam/A 5-axis machine is only as good as its CAM and programmer. What Vietnam shops run, how to ask about simulation and post-processors, and what it means for you.Sun, 11 Oct 2026 00:00:00 GMThttps://5axisvn.com/blog/5-axis-aluminum-machining-vietnam/https://5axisvn.com/blog/5-axis-aluminum-machining-vietnam/Choosing between aluminium 6061 and 7075 for 5-axis parts made in Vietnam: temper, plate versus bar, certificates, anodising and what to specify in the RFQ.Thu, 08 Oct 2026 00:00:00 GMThttps://5axisvn.com/blog/5-axis-aerospace-machining-vietnam/https://5axisvn.com/blog/5-axis-aerospace-machining-vietnam/Which aerospace-type 5-axis parts are realistic in Vietnam today: tooling, brackets and prototypes yes, flight-critical no. What to ask and what stays elsewhere.Sun, 04 Oct 2026 00:00:00 GMThttps://5axisvn.com/blog/chon-loc-rfq-cho-xuong-5-truc/https://5axisvn.com/blog/chon-loc-rfq-cho-xuong-5-truc/Cách đọc một RFQ từ buyer nước ngoài để biết có đáng bỏ công báo giá không, và ba thứ cần hỏi lại trước khi tính giờ máy.Sat, 26 Sep 2026 00:00:00 GMThttps://5axisvn.com/blog/verify-5-axis-capability-vietnam/https://5axisvn.com/blog/verify-5-axis-capability-vietnam/Many shops advertise 5-axis and run 3+2 indexed. Four questions and one document that tell you which one you are actually buying.Sat, 26 Sep 2026 00:00:00 GMThttps://5axisvn.com/blog/vietnam-origin-documents-machined-parts/https://5axisvn.com/blog/vietnam-origin-documents-machined-parts/What substantial transformation means for a machined part, why re-invoicing does not create origin, and what to agree at RFQ stage rather than at the port.Sat, 26 Sep 2026 00:00:00 GMT